Uhlenbrock logoUhlenbrock logo

Uhlenbrock Home Page > Intellibox > IntelliSound > LocoNet > IntelliDrive > IntelliLight > Track-Control > Digital Servos > PRICE LIST > CATALOGUE

Items available 2011:

LOCONET®
LocoNetLocoNet - 63100

The LocoNet bus is the inexpensive and safe link between digital control and operating devices.

LocoNet was developed by Digitrax and has been widely adopted. It used by Ühlenbrock, Digitrax, Fleischmann, Piko and the other manufacturers.

All accessory devices are connected to the LocoNet. Devices from other manufacturers may also be used.

Features

The LocoNet uses a six way cable and is easily managed by using RJ-12 modular connectors. The ease of insertion and extraction of the connectors makes the design of modular layouts far simpler.

In addition it does not matter where in the LocoNet a module is attached. Any vacant LocoNet socket can be used.

For mobile hand control one can plan sockets in the side panels of the layout to connect oneself at lightning speed at any location on the layout.

For setting up a network we offer a multiplicity of suitable, inexpensive, elements. Cable runs of up to 100 meters are absolutely no problem for the LocoNet.

LocoNet layout
A layout showing installation of LocoNet

All devices that are connected to the LocoNet, obtain their operating power from the LocoNet. The necessary current is provided to the LocoNet by the digital center. When using an Intellibox this is 500 mA.

If the current consumption of the attached devices exceeds the current supplied by the digital center, then an additional LocoNet Power feed unit is necessary.

The LocoNet Power Feed Unit (63 100) is equipped with a load indicator and a power plug pack is supplied.

The Components

62010 cable, 28 cm plug plug
62020 cable, 2.15 cm plug/plug
62030 coiled cable, 3 m plug/plug
62040 cable, 60 cm plug/plug
62060 cable, 6 m plug/plug
62120 branching, 2.15 m plug/double socket
62220 clutch socket/socket
62250 distributors
63100 LocoNet


64830LocoNet IR Receiver

With the LocoNet IR-Set Locomotives, turnouts and routes can be controlled wirelessly with any LocoNet Digital Center. Simply connect the LocoNet IR-Receiver with the LocoNet and control everything on the layout with up to four different IRIS hand controllers.

With this receiver you also use the IR remote controls IRIS or PIKO Digi-Fern with IB-Basic, IB-Com, DAISY and the ProfiBoss.

The remote control has four different channels and permits operating the layout with four transmitters in the same room.

63830 - LocoNet IR Receiver.
64830 - LocoNet IR Set (Transmitter & Receiver).
66510 - IRIS Transmitter.
66510 - IRIS Receiver.


63270Power 7 - 63270

The LocoNet equipped Power 7 is a high performance multi- protocol booster for scales O-IIm and is suitable for the DCC, Motorola, mfx data formats.

It provides a further 7A output current for the layout. The device's output has short circuit and overload protection. The Power 7 can be configured with the built-in switches, but you have greater flexibility however when programming the settings via the LocoNet.

If the Power 7 is used in conjunction with an Intellibox II, error messages are shown in the plain text on the Intellibox display.

In DCC systems the Power 7 can be used as brake generator. Depending upon the preset characteristics of the locomotive decoder brake settings the locomotives will slow and stop in prototypical fashion in the braking section. As many brake section as desired can be connected. One or more reversing loop relays can be connected to a Power 7.

As power supply we recommend 150 VA-Transformer 20150.


61080Reversing Loop Relay - 61080.

To operate of several reversing loops you can connect several reversing loop relays to a Power 4 or Power 7.

The reversing loops can then also be separately monitored by feedback modules 63320 or 63340.


63330Feedback Modules with Automatic Function.

The new feedback modules have the proven quality and working reliability of the past feedback modules 63340 and 63350.

Additionally they have the capability to switch solenoids directly from the feedback module. With this function simple switching tasks can be implemented directly by the feedback module without a route from another device such as Intellibox or IB-Switches.

Each track entrance can switch two solenoids when a train enters the attached track section and two further solenoids, when the train leaves the track section. With this automatic function the feedback module can, for example, directly control a railway boom gate, a St Andrews cross or a signal.

Connection via LocoNet

63320 - 2-rail Feedback Module (for 8 track sections).
63330 - 3-rail Feedback Module (for 16 track sections, contacts or keys).


63880s88-LocoNet Adapter. - 63880

With the s88-LocoNet Adapter you can connect s88-feedback modules to any LocoNet Digital Center. Simply insert the Adapter between the s88-Bus and LocoNet and all Märklin compatible s88-feedback modules can be used.

The feedbacks from s88-Modules can also be forwarded to a PC and IB-Switch with IB-Basic, IB-Com, DAISY and ProfiBoss. For Centers without a PC connection use the USB-Adapter 63120.

A number of s88-LocoNet Adapters can be employed on one LocoNet to shorten the bus length on the s88-Module side. In this case each s88-LocoNet Adapter is assigned the base Address of the first s88-Modul in its group.


19300LISSY-Creator - 19300.

LISSY Creator is the new PC-program, for simple user friendly and rapid planning of a model railway layout with LISSY and to program all LISSY receivers with the necessary configuration.

The desired automation is designed on the basis of a layout track plan. Whether a shuttle service, holding point, shadow station or switching of locomotive special functions, all automatic controls, of LISSY's capability, can be setup with the LISSY Creator and planned into the layout.

Furthermore the program administers all addresses, that occur on your layout whether solenoid, feedback, LISSY receiver or train categories. Routes, which are needed for station controls, can likewise be specified and and changed on the PC and programmed into the Intellibox II.


68620LISSY Single Receiver

Infrared receiver with sensor integrated into the module - connection by LocoNet cable.

68620 - Single Receiver
68301 infrared sensor, 5 pack.


68010LISSY Receiver - 68610.

With additional functions - individual loco control, station track switching and through-track control.


68020Remote Station Controller with LISSY. - 68020.

Digital switching for stations with up to 3 platform tracks and a through track, or a station with 5 platform tracks. Interfaces with Intellibox or Twin Center. Includes 3 LISSY receivers and 5 senders, LocoNet cabling, LocoNet 5 channel distributor, extension cable and handbook.


For more information from All Aboard Modellbahn about Ühlenbrock send for a Catalogue or Brochure.

For your nearest reseller see Retail Outlets.

For Trade Enquiries about Ühlenbrock from All Aboard Modellbahn please go to our Trade Enquiries page.

Uhlenbrock logo
Click here for a CATALOGUE.

Last updated 15/11/11